| No. |
Authors
|
Title
|
Conference
|
Sponsor
|
City
|
Date
|
pp
|
1
|
J.F. Elliott
J.D. Nauman
S.K. Sadrnezhaad
|
Heating and Melting of D-R Pellets in Hot Slag |
Third International Iron and Steel Congress |
TMS-AIME |
Chicago, Illinois
|
1978 |
397-404 |
| 2 |
S.K. Sadrnezhaad |
Training of Personnel for the Technical Laboratories |
Regional Seminar on Role of Laboratories in Technical Education at all Levels |
Unesco
|
Colombo, Sril Lanca
|
1981 |
8 pages
|
| 3 |
S.K. Sadrnezhaad |
Academy of Sciences of the Islamic Republic of Iran |
Second General Conference of the Third World Academy of Sciences |
Third World Academy of Sciences |
Beijing, China |
1988 |
13 pages
|
4
|
S.K. Sadrnezhaad
|
Direct Reduced Iron: An Advantageous Charge Material for Induction Furnace |
International Symposium on Metallurgical Processes for the Year 2000 and Beyond |
TMS |
Las Vegas |
1989 |
761 |
| 5 |
S.K. Sadrnezhaad
|
Effect of Inoculation on Microstructure and Properties of C-Mn Steels |
Proceedings of Recrystallization'90 |
Wollongong Univ.
|
Wollongong, Australia |
1990 |
381-386 |
6
|
S.K. Sadrnezhaad
A. Gharavi
0. Morvarid
|
Simulation of Kinetics of Chemical Reactions |
Fourth Biennial Conference on Chemical Metallurgy Calculations |
University of Missouri |
Missouri Rolla |
1992 |
26 |
7
|
S.K. Sadrnezhaad
F. Mashhadi
R. Sharghi
|
Heat Treatment of Ni-Ti Alloy for Improvement of Shape Memory Effect |
5th World Seminar on Heat Treatment & Surface Engineering |
Isfahan Univ. of Tech.
|
Isfahan
|
1995 |
195-200 |
8
|
F.M.H. Zarandi
S.K. Sadrnezhaad |
Thermomechanical Study in Combustion Synthesized Ti-Ni Shape Memory Alloy |
Synthesis of Light Weight Metallic Materials |
TMS
|
Orlando, Florida |
1997 |
1 page
|
9
|
S.K. Sadrnezhaad
A. Simchi
|
Simulation of Iron Smelting-Reduction Process |
International Congress on the Science and Technology of Ironmaking |
ISS
|
Toronto, Canada |
1998 |
1511-1519 |
10
|
E.K. Alamdari
D. Darvishi
S.K. Sadrnezhaad
Z.M. Shabestari
A. O’hadizadeh
M. Akbari |
Effect of TBP as a Modifier for Extraction of Zinc and Cadmium with a Mixture of DEHPA and MEHPA |
International Solvent Extraction Conference |
ISEC |
Cape Town, South Africa |
2002 |
1052-1057 |
11
|
Z. Ali Nemati
B. Hashemi
S.K. Sadrnezhaad
|
Oxidation Mechanisms in MgO-C Refractories |
Tehran International Conference on Refractories |
Tehran University
|
Tehran |
2004 |
134-140 |
12
|
B. Hashemi
Z. Moghimi
Z. A. Nemati
S.K. Sadrnezhaad, |
Determination of Kinetic Parameters of MgO-C |
Fourth International Symposium and 43rd Annual Conference of Metallurgists of CIM |
CIM |
Hamilton, Ontario, Canada |
2004 |
581-591 |
13
|
S. Sanjabi
S.K. Sadrnezhaad
Z. H. Barber, |
Fabrication of TixNi1-X Shape Memory Thin Films using Simultaneous Sputter Deposition from Separate Elemental Targets |
International Conference on Shape Memory and Superelastic Technologies |
The International Organization on
Shape Memory and
Superelastic Technologies |
Baden-Baden, Germany |
2004 |
No. 203 |
14
|
S. Sanjabi
Z. H. Barber
S.K. Sadrnezhaad, |
Fabrication of Shape Memory NiTi Thin Films |
12 Iranian Research Conference in Europe (IRCE2004) |
IRCE
|
Manchester, UK
|
2004 |
- |
15
|
E.K. Alamdari
D. Darvishi
S.K. Sadrnezhaad
Haghshenas |
Synergistic Effect of TBP on Separation of Zinc and Cadmium with D2EHPA |
International Solvent Extraction Conference |
China
|
Beijing, China
|
2005 |
A217 |
16
|
D. Darvishi
M. Teimouri
E.K. Alamdari
D.F. Haghshenas
S.K. Sadrnezhaad, |
Extraction of Manganese from Solutions Containing Zinc and Cobalt by D2EHPA and D2EHPA-CYANEX®272 or CYANEX®302 Mixtures |
International Solvent Extraction Conference |
China |
Beijing, China |
2005 |
A216 |
17
|
S. Sanjabi
S.K. Sadrnezhaad
Z.H. Barber |
Fabrication and Characterization of NiTi-based Shape Memory Thin Films |
Tehran International Congress on Manufacturing Engineering (TICME2005) |
Tehran University
|
Tehran
|
2005 |
1-7
No. 3171
|
18
|
S. Sanjabi
S.K. Sadrnezhaad
Z.H. Barber |
Fabrication of Ni50Ti50-xHfx memory thin film using simultaneous sputter deposition from separated elemental targets |
SMST 2006 |
ASM International |
California, USA |
2006 |
|
| 19 |
S.K. Sadrnezhaad
D. Hosseini
Y.B. Molla Mahaleh
H. Payab |
Optimization of Water-Cooled Seal Boxes of the Pelletizing Furnaces of the Khuzestan Steel Company |
49th Internationales Feuerfest-Kolloquium 2006 |
Feuerfeste Werkstoffe für die Metallerzeugung |
Aachen, Germany |
2006 |
64-67 |
| 20 |
M.A. Saghiri
S.K. Sadrnezhaad
M. Saghiri
M. Aminsobhani |
Structural, Composition, and Mechanical Properties of Gutta-Percha used in Endodontics |
10th International Congress of Endodontists |
Department of Medical Science, Sahid Beheshti University |
Tehran |
2007 |
66 & 91 |
| 21 |
M.A. Saghiri
S.K. Sadrnezhaad
M. Saghiri
S.A. Saneii |
Biocompatibility of Diamond-Like Carbon Coated NiTi Orthodontic Wire |
Iran's 1st International Conference on Biomaterials |
University of Tehran & Tehran University of Medical Sciences |
Tehran |
2007 |
Paper 5448 |
| 22 |
S.A. Manafi
B. Yazdani
M.R. Rahimipour
S.K. Sadrnezhaad
M.H. Amin |
Synthesis of Nano-Hydroxy-Apatite by Hydrothermal Process for Biomedical Application |
Iran's 1st International Conference on Biomaterials |
University of Tehran & Tehran University of Medical Sciences |
Tehran |
2007 |
Paper L. 58
78
|
| 23 |
M.A. Saghiri
S.K. Sadrnezhaad
M. Saghiri
M. Aminsobhani |
Mechanical Behavior and Composition of Gutta-Percha |
Iran's 1st International Conference on Biomaterials |
University of Tehran & Tehran University of Medical Sciences |
Tehran |
2007 |
Paper P. 29
119
|
| 24 |
M.A. Saghiri
S.K. Sadrnezhaad
K. Abolmoluki |
Invitro Evaluation of Cytotoxicity and Elemental Release of Three Types of Nickel – Chromium Basemetal Alloys and Compare it With one Type of High Noble (Gold-Palladum- Silver) Alloy |
World Biomaterials Congress |
WBC |
Amsterdam, Netherlands |
2008 |
1 page |
| 25 |
M. Mazaheri
Z. Razavi Hesabi
A.M. Zahedi
S.K. Sadrnezhaad |
Sintering of Titania Nanoceramics: Densification and Grain Growth
|
2nd Conference on Nanostructures (NS2008) |
Kish University |
Kish, I.R. Iran |
2008 |
1 page |
| 26 |
S. Khameneh Asl
S.K. Sadrnezhaad
M. Kianpoor Rad |
Photocatalytic decolorization of Red Dye in aqueous doped-TiO2 suspensions |
International Catalysis Conference (ICC 2008) |
Shahid Beheshti
University |
Tehran
Iran |
2008 |
1 page |
| 27 |
R. Tolouei
A. Behnamghader
S.K. Sadrnezhaad
M. Daliri Joupari |
Manufacturing Porous BCP Body by Negative Polymer Replica as a Bone Tissue Engineering Scaffold |
Chwee Teck Lim, James C.H. Goh (Eds.): ICBME 2008, Proceedings 23
|
Melbourne University |
Melbourne, Australia |
2008 |
1305–1308 |
| 28 |
N.A. Arefian
A. Esmaielzadeh
M. Farzalipour
M.R. Vaezi
S.K. Sadrnezhaad |
Photocatalytic Degradation Mechanisms and Kinetics of Acid Red 27 Dissolved in Water in Presence of Nano SnO2 |
2nd International Conference on Science and Technology of Nano |
Iran’s Nanotechnology Association |
Tabriz, Iran |
2008 |
- |
| 29 |
N. Bahramian
M.A. Saghiri
M. Lotfi
A. Delavarani
S.K. Sadrnezhaad
|
Scrutiny Scanning Electron Microscope and Differential Scanning Calorimetric Studies of New and Sterilized Nickel-Titanium Rotary Endodontic Instruments |
48th International Annual Scientific Dental Congress of Iranian Dental Association |
Iranian Dental Association |
Tehran |
2008 |
249-250 |
| 30 |
M.A. Saghiri
S.K. Sadrnezhaad
A.M. Saghiri
N. Bahramian
A.P. Mahmoudzadeh |
In Vitro Short Time Evaluation of Elements Release and Cellular Toxicity of Nickel Base Alloys Applied in Dentistry |
48th International Annual Scientific Dental Congress of Iranian Dental Association |
Iranian Dental Association |
Tehran |
2008 |
251-252 |
| 31 |
R. Tolouei
A. Behnamghader
S.K. Sadrnezhaad
M. Daliri Joupari |
Manufacturing Porous BCP Body by Negative Polymer Replica as a Bone Tissue Engineering Scaffold |
13th International Conference on Biomedical Engineering, IFMBE Proceedings |
IFMBE
|
Bangkok, Thailand |
2009 |
1305-1308 |
| 32 |
M.A. Saghiri
A. Delvarani
M. Lotfi
N. Bahramain
S.K. Sadrnezhaad |
New Protocol for Tissue Management in Endo and Periodontics |
48th International Annual Scientific Dental Congress |
Iranian Dental Association |
Tehran, Iran |
2009 |
p 245 |
| 33 |
M.A. Saghiri
S.K. Sadrnezhaad
N. Bahramian
M. Lotfi
A. Mahmoudzadeh |
Invitro evaluation of cytotoxicity and elemental release of three types of nickel-chromium base metal alloys (short term) |
First International Conference on Multifunctional, Hybrid and Nanomaterials (Hybrid Materials 2009) |
Vinci Convention Centre |
Tours, France |
2009 |
249-250 |
| 34 |
M. Salehi
S.K. Sadrnezhaad |
Effect of Kinetic Parameters on Growth of One-Dimensional Tin Oxide Nanostructures |
2nd International Conference on Ultrafine Grained and Nanostructured Materials |
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran |
Tehran, Iran |
2009 |
Abstarct: 87 |
| 35 |
M. Mazaheri
A.M. Bazargan
M. Naghavi
S.K. Sadrnezhaad |
Fabrication of Pyrochlore-free Lead Magnesium Niobate Ceramic from
Nanopowder Precursors via Single Step Sintering |
11th ECERS Conference |
ECERS |
Krakow, Poland |
2009 |
272-275 |
| 36 |
M. Mazaheri
Z. Razavi Hesabi
M. Haghighatzadeh
S.K. Sadrnezhaad |
Sintering and Grain Growth Behaviour of Ultra Fine Al2O3 Powder |
11th ECERS Conference |
ECERS |
Krakow, Poland |
2009 |
176-179 |
| 37 |
S.K. Asl
M. Kianpoor Rad
S.K. Sadrnezhaad
M.R. Vaezi |
The effect of microstructure on the photocatalytic properties of TiO2 |
Advances in Materials and Processing Technologies (AMPT2009) |
International Islamic University
|
Malaysia |
2009 |
|
| 38 |
A. Azizi
S.K. Sadrnezhaad
M. Mostafavi |
Control of Particle Size and Morphology of Cobalt-Ferrite Nanoparticles by Salt-Matrix During Annealing |
2nd International Conference on Ultrafine Grained and Nanostructured Materials |
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran |
Tehran, Iran |
2009 |
Abstarct: 99 |
| 39 |
A. Eskandari
M. Aminzare
S.K. Sadrnezhaad
Z. Razavi Hesabi |
Compaction Response and Sintering Behavior of Alumina Nanoparticle: Effect of Agglomeration and Particle Coordination |
2nd International Conference on Ultrafine Grained and Nanostructured Materials |
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran |
Tehran, Iran |
2009 |
Abstarct: 111 |
| 40 |
M. Mazaheri
S.A. Hassanzadeh
M. Aminzare
S.K. Sadrnezhaad |
Synthesis of CeO2 Nanocrystalline Powder by Precipitation Method |
Proceedings of the 11th
ECERS Conference |
ECERS |
Krakow, Poland |
2009 |
655-658 |
| 41 |
D. Mohammadyani
S.A. Hosseini
S.K. Sadrnezhaad |
Characterization of Nickel Oxide Nanoparticles Synthesized via Rapid Microwave-Assisted Route |
2nd International Conference on Ultrafine Grained and Nanostructured Materials |
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran |
Tehran, Iran |
2009 |
Abstarct: 108
|
| 42 |
R. Neghabat Shirazi
S.K. Sadrnezhaad
H.A. Shafiee |
Recycling of used super elastic NiTi orthodontic wires via electromechanical treatment |
The 4th Annual Scientific Meeting IADR Iranian Division |
Iran Center for Dental Research
Shaheed Beheshti University |
Tehran, Iran |
2009 |
Article No.:
2009244,
Page 86 |
| 43 |
M. Salehi
S.K. Sadrnezhaad |
Heat Treatment Conditions for Growth of One-Dimensional Tin Oxide Nanostructures |
3rd Conference on Nanostructures (NS2010) |
SUT |
Kish Island, I.R. Iran |
2010 |
401-403
|
| 44 |
D. Mohammadyani
S.A. Hosseini
S.K. Sadrnezhaad
|
Sonochemical Synthesis of Nickel Oxide Nano-particle |
3rd Conference on Nanostructures (NS2010) |
SUT |
Kish Island, I.R. Iran |
2010 |
722-725
|
| 45 |
Y.B. Mollamahale
D. Hosseini
S. K. Sadrnezhaad
|
Surfactant-Free Nonaqueous Route for Preparation of Metallic Nickel Nanoparticles |
3rd Conference on Nanostructures (NS2010) |
SUT |
Kish Island, I.R. Iran |
2010 |
730-732
|
| 46 |
A. Azizi
M. Mohammadi
S.K. Sadrnezhaad |
Effect of pretreatment of AAO template on NiCoFe Nanowires Synthesized by Electroless Deposition |
3rd Conference on Nanostructures (NS2010) |
SUT |
Kish Island, I.R. Iran |
2010 |
1303-1306 |
| 47 |
A. Azizi
M. Mohammadi
S.K. Sadrnezhaad
M. Majidian
|
Morphological Study of CoNiFe-B Thin Film Fabricated on Si Substrate by Electroless Method |
3rd Conference on Nanostructures (NS2010) |
SUT |
Kish Island, I.R. Iran |
2010 |
1310-1313 |
| 48 |
A. Azizi
S.K. Sadrnezhaad
R. Eskandari
|
Morphological study of the FeCo magnetic thin film fabricated by EBPVD |
NanoTR-VI-2010, Cesme |
Izmir Institute of Technology |
Izmir
Turkey |
2010 |
435 |
| 49 |
A. Azizi
M. Mohammadi
S.K. Sadrnezhaad
M.R. Hasanzadeh
H. Azizi
|
Effect of Heat Treatment on Microstructure and Magnetic Properties of Electroless CoNiFe-B Thin Film |
NanoTR-VI-2010, Cesme |
Izmir Institute of Technology |
Izmir
Turkey |
2010 |
434 |
| 50 |
A. Azizi
M. Mohammadi
S.K. Sadrnezhaad
|
Effect of Heat Treatment on Properties of Electroless NiCoFe-B Coatings |
International Conference on Materials Heat Treatment (ICMH 2010) |
Islamic Azad University, Majlesi Branch |
Isfahan
Iran |
2010 |
8 pages
|
| 51 |
S.K. Sadrnezhaad
M. Malekjafarian
A. Abazarpoor |
Carbide layer elimination for optimization of 1.3247 tool steel properties
|
International Conference on Materials Heat Treatment (ICMH 2010) |
Islamic Azad University, Majlesi Branch |
Isfahan
Iran |
2010 |
poster
|
| 52 |
E. Ahmadi
M. Malekzadeh
S.K. Sadrnezhaad |
An Investigation on the Milling and Hydrogen Reduction Behavior of Nanostructured W-Cu Oxide Powder
|
Proceedings of the International Conference on Nanotechnology: Fundamentals and Applications
|
International Academy of Science, Engineering and Technology
(International ASET) |
Ottawa Ontario
Canada |
4-6
August 2010 |
pp 478-1 to
478-8
|
| 53 |
M. Mohamadijoo
S.K. Sadrnezhaad
Z.N. Khorshidi |
Nanopowder synthesis of nickel oxide via solochemical processing: effect of dissolution temperature on structure and morphology |
X International Conference on Nanostructured Materials (NANO2010) |
La Sapienza University |
Rome
Italy |
September
2010 |
p 97
|
| 54 |
M. Salehi-Doolabi
S.K. Sadrnezhaad |
Electrodeposition of Cr–Al2O3 Nano-composite Coatings from Trivalent Chromium Bath: Evaluation of Current Efficiency and Electroplating Characteristics |
X International Conference on Nanostructured Materials (NANO2010) |
La Sapienza University |
Rome
Italy |
September
2010 |
p 196
|
| 55 |
A. Azizi
S.K. Sadrnezhaad
G. Aliannejad
|
E-Beam Evaporated FeNi/FeCo Multilayer Film |
NanoThailand 2010 |
Thailand Science Park Convention Center (NSTDA) |
Pathumthani
Thailand |
November 2010 |
p 5-6 |
| 56 |
M. Najafi
M.R. Vaezi
S.K. Sadrnezhaad
|
Synthesis and characterization of CuInSe2 Nanopowder with Different Morphologies |
International Congress on Nanoscience and Nanotechnology |
Shiraz University |
Shiraz
|
November 2010 |
2 pages |
| 57 |
N Hassanzadeh
S.K. Sadrnezhaad
|
Characterization of a Smart Nitinol/Silicone Rubber Composite for using in Soft Tissue Replacements |
The 2nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2) |
Hotel Eram |
Kish Island
Iran |
December 2010 |
CCFA-112-1 |
| 58 |
S. Khameneh Asl
S.K. Sadrnezhaad
M. Kianpour Rad
M.R. Vaezi
|
Application of new type of advanced composites: nano core shell composites |
The 2nd International Conference on Composites: Characterization, Fabrication & Application (CCFA-2) |
Hotel Eram |
Kish Island
Iran |
December 2010 |
CCFA-141-1 |
| 59 |
M. Aryana
S.K. Sadrnezhaad
N. Hassanzadeh
|
Production and Characterization of Ti6Al4V Foam for Cancellous Bone Implants |
2nd International Conference on Materials Heat Treatment (ICMH 2011) |
Islamic Azad University, Majlesi Branch |
Isfahan
Iran |
10-12
May
2011
|
p 68
|
| 60 |
S.A. Hosseini
A. Ghasemi
S.K. Sadrnezhaad
|
Phase Transformation Behavior of Porous NiTi Alloys Produced by Space-holder Method |
2nd International Conference on Materials Heat Treatment (ICMH 2011) |
Islamic Azad University, Majlesi Branch |
Isfahan
Iran |
10-12
May
2011
|
p 82
|
| 61 |
S.K. Sadrnezhaad
M. Malekjafarian
A. Abazarpoor
|
Layer carbides eliminating process and optimization of high-speed steel (HSS) properties |
2nd International Conference on Materials Heat Treatment (ICMH 2011) |
Islamic Azad University, Majlesi Branch |
Isfahan
Iran |
10-12
May
2011
|
p 10
|
| 62 |
M. Ganjali
N. Yasavol
S.K. Sadrnezhaad
|
Nanosecond Laser Annealing of NiTi Amorphous Thin Film |
Advances in Applied Physics and Materials Science (APMAS 2011) |
Istanbul Kultur University
Gebze Institute of Technology |
Antalya
Turkey |
12-15
May
2011
|
p 129
|
| 63 |
M.S. Abravi
M. Malekjafarian
M. Golestanipour
H. Amini Mashhadi
S.K. Sadrnezhaad
|
Effect of SiC Ceramic Particles on the Cell Structure of
Aluminum Foam |
7th International Conference on Porous Metals and Metallic Foams (MetFoam 2011) |
BEXCO
Busan, Korea |
Busan
Korea |
18-21 September
2011
|
pp 237-242
|
| 64 |
M. Malekjafarian
S.K. Sadrnezhaad
M.S. Abravi
M. Golestanipour
H. Amini Mashhadi
|
Manufacturing of Open Cell Copper Foam by Electroless Method |
7th International Conference on Porous Metals and Metallic Foams (MetFoam 2011) |
BEXCO
Busan, Korea |
Busan
Korea |
18-21 September
2011
|
pp 105-110
|
| 65 |
M.S. Abravi
M. Malekjafarian
M. Golestanipour
H. Amini Mashhadi
S.K. Sadrnezhaad |
Investigation of SiC and CaCO3 on Compressive Properties of Aluminum Foam |
7th International Conference on Porous Metals and Metallic Foams (MetFoam 2011) |
BEXCO
Busan, Korea
|
Busan
Korea |
18-21 September
2011
|
pp 189-194 |
| 66 |
M. Malekjafarian
S.K. Sadrnezhaad
M.S. Abravi
M. Golestanipour
H. Amini Mashhadi |
Manufacturing Aluminum Foams by Melt Gas Injection Process |
7th International Conference on Porous Metals and Metallic Foams (MetFoam 2011) |
BEXCO
Busan, Korea |
Busan
Korea |
18-21 September
2011
|
pp 195-202 |
